Calibration pin, 8 mm diameter (+0.0025/-0.0000 in), 50.8 mm long, for setting and verifying probe systems. Traceable to NIST; tolerances conform to ASME B89.1.5-1998.

BLUM-Novotest calibration ring, 40 mm diameter, used to calibrate TC-series workpiece touch probes for stylus ball diameter and probe eccentricity.

BLUM-Novotest ceramic stylus, 50 mm length, 5 mm ball diameter, for TC-series touch probes. At 50 mm stylus length the TC62 gives 11 mm max deflection in X/Y at 1.5 N measuring force. Styli are wear parts and are replaced as consumables.

High speed skip (HSS) interface cable, 10 m, for connecting a BLUM probing system to a FANUC control. Rev C build.

BLUM-Novotest IF20 interface for radio probing systems. DIN rail mounted (DIN EN 50022-35), 128 x 102 x 52 mm. Sits between the RC66 radio receiver and the machine control, and accepts optional extension modules such as the EM30.

BLUM-Novotest MG80 multipurpose gauge (Generation 2) for in-machine temperature and pressure measurement. Accepts up to four temperature sensors (T1-T4) and four pressure sensors (P1-P4). Temperature range -5 to +80 C, absolute accuracy +/-1 K at 20 C, linearity +/-2 K. Pressure ranges 0-200 bar and 0-600 bar, absolute accuracy +/-1% at 20 C. Radio transmission on 2.400-2.4835 GHz, pairs with the RC66 receiver. IP67. Powered by 2x 3.6 V AA lithium cells.

BLUM-Novotest optocoupler module for electrically isolating probe signals, 5-24 V DC. DIN rail mounted (EN 50022 or EN 50035), 86 x 82 x 68 mm.

BLUM-Novotest RC66 radio receiver - the hub of a BLUM radio probing system. Receives from radio touch probes and tool setters such as the TC62, Z-Nano RC and MG80, and connects to an IF20 or IF59-A2 interface. Frequency band 2.400-2.4835 GHz with LED mode indication.

BLUM-Novotest TC62 workpiece touch probe with radio signal transmission. Trigger-point repeatability 0.3 um (2 sigma) at 30 mm stylus length. Approach directions +/-X, +/-Y and -Z, max deflection +/-11 deg in X/Y and 6 mm in Z, measuring force 5.7 N in Z. Permanent collision control. IP68. Radio band 2.400-2.4835 GHz, pairs with the RC66 receiver. Shaft for BTH 25 tool holder. Powered by 2x 3.6 V 1/2AA lithium cells. Mass 250 g.

BLUM-Novotest tool holder, hollow taper shank HSK-F 63 to DIN standard, with BTH25 probe shank interface for mounting TC-series touch probes. Provision for a 12 mm code chip carrier.

BLUM-Novotest Z-Nano RC tool setter with radio signal transmission, for automatic tool length measurement and broken-tool detection. Radio activation, pairs with the RC66 receiver. The radio version of the wired Z-Nano.

BLUM-Novotest Z-Nano tool setter, cabled version, for automatic tool length measurement and broken-tool detection. Supplied with a 10 m standard cable; 20 m standard and 10/20 m HP cable variants are available as separate order numbers (145795, 145796, 145802).