CAPTRON OGLW2-40T-2PS6 laser tool-centre-point measuring unit with M8 cordset, sensor mount and SINUMERIK integration. Optional Easy Screens and documented G-code examples for setting TCP.

SINUMERIK ONE operator system: PPU 1740 panel processing unit + matching SINUMERIK ONE machine control panel, pre-mounted and wired in a Rittal AX rear-access operating housing (600 x 600 x 210, Type 12) for support-arm or pedestal mounting.

SINUMERIK Run MyCC /ROCO robot compensation, both options. ROCO Accuracy (6FC5800-0BN83-0YB0) compensates static and load-dependent deflection so the TCP holds position under cutting force; ROCO Productivity (6FC5800-0BN84-0YB0) compensates dynamic error so the same accuracy can be held at higher feed and acceleration. Both are delivered as electronic licences (PDF) against a named e-mail address, require customer-specific release from Siemens, and are not available for export variants.

Pre-wired PROFINET spindle-side I/O and utility enclosure for Run-My-Robot machining cells. One 24 VDC feed and one PROFINET drop replace the spindle umbilical.

Twelve Siemens software options and licences for a SINUMERIK ONE Run MyRobot cabinet: multi-axis package, Run MyRobot /Direct Control, main/sub-axis, Advanced Positioning Control, Friction Compensation, SIMATIC Safe Kinematics, Safety Integrated Plus (multi-axis and SI-Logic), CNC-SW 6.25 SP1 on SD plus 6.23 media, SINUMERIK Operate /NCU and Create MyConfig 6.2. Normally customer-supplied; quoted as an adder when THINK-PLC provides it. Run MyCC /ROCO is a separate option.

SINUMERIK Run MyRobot control cabinet for COMAU robots. UL 508A, built in the USA. Built to order across five option groups.

SINUMERIK Run MyRobot control cabinet for COMAU robots. UL 508A, built in the USA. Built to order across five option groups.

SINUMERIK Run MyRobot control cabinet for the Danobat dBOT S2 220/2600. UL 508A, built in the USA. Built to order across five option groups.

Laser-based robot accuracy calibration from iSiOS GmbH (Siemens Xcelerator Marketplace). A compact laser on the robot (45 x 11 mm) works with a stationary sensor to measure the real kinematic out to 100 m; proprietary software identifies geometric and kinematic error and compensates it in real time inside SINUMERIK, with operator access through SINUMERIK Operate and no extra hardware in the cell. Corrects both position and orientation error with an adjustable weighting between them, and typically brings absolute accuracy at the TCP to about twice the multidirectional repeatability. Also covers external axis alignment and TCP setup, and includes recalibration so accuracy can be monitored and restored in-house. Scoped per project.