BLUM-Novotest · Tool setting
Z-Nano RC Tool Setter (Radio)
BLUM part no. 146539
Radio tool setter for automatic tool length measurement and broken-tool detection, with permanent collision control and radio activation.
Technical data
Trigger repeatability 0.5 µm 2σ
Approach direction−Z
Measuring force2.2 N (vertical mounting)
Max stroke10 mm
Skip position1 mm
Protection classIP 68
Signal transmissionRadio, 2.400–2.4835 GHz
ActivationRadio
ReceiverRC66
Battery2 × 3.6 V 1/2AA lithium (LS 14250)
Max acceleration200 m/s²
Mass290 g
Mounting4 × M3×8 (DIN 912)
Collision controlPermanent
Application notes
The 200 m/s² vibration rating makes this the version to use where the setter is mounted on a moving table or inside a machine with heavy chip evacuation. Where a cable run is acceptable, the wired Z-Nano (145793) does the same job without batteries.
Documentation
BLUM drawings and manuals are supplied under Blum-Novotest's ISO 16016 confidentiality notice, so they are released on request rather than published here.
?unique=a227d21)