Skip to Content
Home └Allen-Bradley HMI Station - Installation, Commissioning and Operation
Allen-Bradley HMI Station - Installation, Commissioning and Operation

Allen-Bradley HMI Station - Installation, Commissioning and Operation

Everything an installer, commissioning technician or maintenance electrician needs to put a THINK-PLC Allen-Bradley HMI Station into service and keep it running.

The course covers the station and how to read its Build ID, choosing between the PanelView Plus 7 and PanelView 5500 terminals, mounting and field wiring, first power-up, setting the terminal address and loading the application, the optional E-Stop and push button configurations, and routine maintenance.

Join this Course
Responsible Bobby Cole
Last Update 08/19/2026
Completion Time 2 hours 40 minutes
Members 1
  • Start here
    2Lessons · 15 min
    • About this course
    • Reading the Build ID
  • 01 - Overview and specifications
    3Lessons · 35 min
    • What the HMI Station is
    • Choosing the terminal: PanelView Plus 7 or PanelView 5500
    • Enclosure, subpanel and door layouts
  • 02 - Installation
    3Lessons · 35 min
    • Mounting and environment
    • Power and field wiring
    • Network connections
  • 03 - Commissioning
    3Lessons · 40 min
    • First power-up checks
    • Setting the terminal IP address
    • Loading the application
  • 04 - Pilot devices (B2 and B3)
    2Lessons · 20 min
    • The E-Stop circuit
    • Start, Stop and Reset buttons
  • 05 - Maintenance and support
    2Lessons · 15 min
    • Routine checks
    • Support and spares