Siemens HMI Station - Installation, Commissioning and Operation
Everything an installer, commissioning technician or maintenance electrician needs to put a THINK-PLC Siemens HMI Station into service and keep it running.
The course covers the station itself and how to read its Build ID, choosing between the SIMATIC Basic, Comfort and Unified Comfort panels, mounting and field wiring, first power-up, setting the panel address and downloading a project from TIA Portal, the optional E-Stop and push button configurations, and routine maintenance.
| Responsible | Bobby Cole |
|---|---|
| Last Update | 08/20/2026 |
| Completion Time | 3 hours 10 minutes |
| Members | 1 |
-
Start here2Lessons · 15 min
-
About this course
-
Reading the Build ID
-
-
01 - Overview and specifications3Lessons · 35 min
-
What the HMI Station is
-
Choosing the panel: Basic, Comfort or Unified Comfort
-
Enclosure, subpanel and door layouts
-
-
02 - Installation3Lessons · 35 min
-
Mounting and environment
-
Power and field wiring
-
Network connections
-
-
03 - Commissioning3Lessons · 40 min
-
First power-up checks
-
Setting the panel address
-
Downloading the HMI project from TIA Portal
-
-
04 - Memory card, backup and restore3Lessons · 30 min
-
Which panels take a card, and which cardNew
-
Backing up the runtime to the cardNew
-
Restoring a panel from the cardNew
-
-
05 - Pilot devices (B2 and B3)2Lessons · 20 min
-
The E-Stop circuit
-
Start, Stop and Reset buttons
-
-
06 - Maintenance and support2Lessons · 15 min
-
Routine checks
-
Support and spares
-